Filter
Anode anti-twist lock for Variprofile VP64/76
Anode anti-twist lock for Variprofile VP 64/76, plastic pins for the top part of the housing 1 set = 2 pieces.

€2.69*
Anode holder for VARIFOLD VF-108
Replacement anode holder for VARIFOLD folding propeller VF-108. This is required to fix the zinc anode; included with the purchase of a new VARIFOLD propeller.

€83.45*
Anode screw for VARIPROFILE VP64/76 incl. 2 washers (M6x25)
Screw for zinc anode Variprofile VP64 & VP76 incl. 1x lock washer + 1x white plastic washer

€2.75*
Anode screws for VARIPROP with lock washers, 3 pcs.
Propeller type: GP-80
Fixing screw SET for zinc anode Variprop DF/GP80 - DF140 including of: 3x hexagon socket screw and 3x lock washerIMPORTANT: The lock washers guarantee that the anode is secured!

from €3.47*
Blade bolt set for VARIFOLD VF-70/SE
Blade bolt set for Varifold folding propeller VF-70/SE including: 2 pcs. blade bolts with screws (See in drawing pos. 6= wing bolt, pos. 7: M5x25mm & pos. 8: M10x10mm)

€52.54*
Grease nipple M5
Grease nipple M5. Suitable for all Variprofile types and for Variprop types from year of manufacture 1998 and later.

€4.49*
Hand lever grease gun
Hand lever grease gun with high-pressure hose and gripper mouthpiece - suitable for our special grease EP/SAL.

€65.64*
Hexagon head screw / blind plug for feathering propeller
Hexagon screw as blanking plug for both the VARIPROP and the VARIPROFILE feathering propeller: VARIPROP Up to and including year of manufacture 1997 = M6x6mm From year of manufacture 1998 = M5x6mm VARIPROFILE All years of manufacture = M5x6mm Please select your size.

from €3.62*
Hook spanner with square pin
Hook spanner with square pin (to DIN 1810 A) for stuffing boxes. For the correct size, simply select the shaft diameter.

from €24.43*
Locking screw for VARIPROP propeller fixing nut
Grub screw/threaded pin for securing the propeller fixing nut of a VARIPROP feathering propeller. Please select a size or propeller type. Unit: piece

from €0.60*
Loctite thread locker for VARIPROP & VARIPROFILE
LOCTITE low (low strength) threadlocker. Prevents the screws from loosening due to vibration, yet easy to remove. Fl. 3ml LOCTITE medium (medium strength) threadlocker. Prevents the screws from loosening due to vibration and seals them at the same time. Fl. 3ml LOCTITE low+medium (low+medium strength) threadlocker. Set: 1x Loctite low + 1x Loctite medium; 3ml each

from €5.62*
Polyrethane buffers for Varifold VF-108/120 (SET)
Buffer for VARIFOLD 3- and 4-blade folding propellers minimize the shock when opening the blades. The hard-wearing rubber or plastic buffers fit securely in the special cut-outs in the saildrive hub. This ensures that the propeller starts up smoothly without the buffers coming loose. Please select the correct buffer size according to your propeller type and the year of manufacture. VF-108 <2011 Polyrethane (rubber) buffers for the Varifold 3-blade folding propeller by SPW for the hub-version up to the year of manufacture 2012. Black, round 20mm x 5mm VF-108 >2012 Buffers for the Varifold folding propeller 3- und 4-blade (VF-108 & VF-120) for the hub-version, year of manufacture 2013 and later; you need 3 or 4 buffers. White, round 24/19mm x 10mm with pin

from €10.20*
Polyrethane buffers for Varifold VF-70 (SET)
Bumpers for VARIFOLD 2-blade folding propellers minimize the shock when opening the blades. The hard-wearing rubber or plastic buffers fit securely in the special cut-outs in the saildrive hub. This ensures that the propeller opens smoothly without the buffers coming loose. Please select the correct buffer size according to your propeller type and the year of manufacture. 1 SET = 2 items VF-70 <2010 Polyrethane (rubber) buffers for the Varifold 2-blade folding propeller from SPW for hub version up to year of manufacture 2010. Black, round 16mm x 8mm VF-70 >2011 Buffer for the Varifold 2-blade folding propeller from SPW for hub version from model year 2011. White, round 16mm x 5mm with pin

from €7.54*
Puller for VARIFOLD 2- and 3-blade folding propellers
Puller for the Varifold folding propeller, available for 2- and 3-blade propellers. The puller helps you to easily remove a stuck propeller from the shaft. Please select a propeller type when ordering.

from €32.56*
Puller for VARIPROFILE propeller VP64/76
Puller for the VARIPROFILE feathering propeller; available for VP-64 and VP-76. The puller helps you to easily remove a stuck propeller from your shaft.

€95.19*
Puller for VARIPROP feathering propellers, 2-/3-/4-blade
Puller for Variprop DF/GP80 - DF140 for 2-, 3- and 4-blade feathering propellers. The puller helps you to easily remove a stuck propeller from your shaft. To order, please select your propeller type and the number of blades. (2-blade puller not pictured)

from €145.85*
Rope cutter
The SPW rope cutter is a great help in saving lives and ships. The rotation of the propeller draws loose obstacles floating in the water, such as ropes, nets, plastic and seagrass, directly into the cutting edges of the rope cutter and then cuts them immediately. This happens before the obstacles damage the drive and/or the engine and therefore render the ship unable to maneuver. The load on the drive is minimal and is so effective that you hardly feel it. The SPW rope cutters are attached around the shaft with two halves of the propeller guard; no need to remove the propeller. The rope cutter ... is quick and easy to fit ... offers an effective design for cutting ropes, nets & seagrass, among other things ... results in low maintenance costs; only inspection during the yearly "check-up" when the ship comes out of the water. The SPW rope cutter (2-part) is available for shaft diameters of 25, 30 and 35 mm. Please select according to the shaft diameter. 

from €353.01*
Service package for VARIPROP
The service package includes everything you need for independent maintenance of the propeller. The package is available here in the store for the DF/GP-80, 107, 110, 112, 128 and 140 and consists of: 1x grease nipple M51x hand lever grease gun1x cartridge of special EP/SAL grease1x zinc anodeFor the Variprop DF/GP-80 & DF/GP-107 we also offer the service package optionally with magnesium (sweet water) and aluminum anode (brackish water).  For sizes without anode specification, the zinc anode (salt and brakish water) is automatically supplied. To order, please select your propeller type. 

from €145.47*
Shaft seal for stuffing box
The shaft seal prevents grease from escaping to the outside and water from penetrating to the inside! Please select the size based on the shaft diameter.

from €17.39*
Special grease EP/SAL for propellers and stern tubes, 400g cartridge
Special seawater-resistant grease. Suitable for all feathering propellers and stern tubes. 400g cartridge

€58.27*
SPW Crew Cap
Material: Zink
SPW casual cap, gray with stitched logo 100% cotton one size, adjustable unisex

€19.90*
Stuffing box gland packing / Sealing Strip
The gland packing is pressed onto the shaft with the stuffing box piston, ensuring an even and continuous seal.  Available in various sizes. Please select the desired width and length when ordering.

from €9.70*
Tikal Tef-Gel® anti-corrosion for SD installations
Corrosion-Stopper, 10 g tube (in ziplock bag)Tef-Gel® is a waterproof, PTFE-based paste that can be used universally. It prevents the blossoming of metal and reliably protects against corrosion between aluminum and stainless steel as well as bronze metals. It can also be used as a seawater-resistant lubricant and as a sealant to stop water ingress.  Always install your screws and bolts with Tef-Gel® and everything will be easy to undo, even after intensive use in seawater. The same applies to shroud tensioners.  Tef-Gel® is not dangerous to health and has no hazard labels. It is also eco-friendly. The product can be stored for a period of more than 10 years. Note: Please note that due to shipping restrictions for liquids, this product can´t be shipped outside Germany.

€13.02*
VARIFLEX - Flexible coupling K-100 for Ø20-25mm
Areas of Application: Installation between reversing gear and propeller shaft Special features:SGF joint discs with integrated loop packs made of textile fibres Modern and proven through multiple industrial applications in the automotive industryHole patterns of the most common gearboxes combined in one flange, other hole patterns are manufactured at no extra chargeSupplied complete: with clamping flange, all screws and locking devices, installation instructions  Benefits:Reduced vibration and sound transmission within the bodyGalvanic separation of motor and shaft systemHighly elastic - torsional vibrations and shocks are dampened Deviations in the motor bearings and misalignment are compensated up to 3° Transmission through sling packs without metallic connection  Completely maintenance-free Comfortable installation by clamping flanges Extends the service life of the components in the drive trainThe following adapter flanges are also available:Flange-2  Volvo type, centring recess ø60 H8 passage, Lk-ø 80mm - 4x90° / M10 f. Stud bolt Overall diameter: 102mm x 12mm long for gearbox type: MS10A/L; MS15A/L and MS25A/L  Flange-2A  Volvo type, centring recess ø60 H8 - 4 deep Lk-ø 80mm - 4x90° / bore-ø11 Overall diameter 102mm x 48mm long for gearbox type: MS, MSB and all MS2 ATTENTION: To find the right coupling for your system, please refer to the model overview found under “Product brochure PDF”

from €387.81*