Variprofile anode for VP64 and VP76. Available in zinc (salt and brackish water), magnesium (fresh water) and aluminum (brackish water).Please select the propeller type and material when ordering. The anode fixing screws are NOT included in the scope of delivery. These are available here in our online store.
Variprop anode for DF-80, DF-107, DF-112 and DF-128/140. Available as zinc (salt- and brackish water), magnesium (fresh water) oder aluminium. The Variprop DF 128/140 anode is only available as a zinc anode.
Please select the propeller type and the anode material for your order. The anode screws are NOT included. They are available here in our online shop as well.
Fixing screw SET for zinc anode Variprop DF/GP80 - DF140 including of: 3x hexagon socket screw and 3x lock washerIMPORTANT: The lock washers guarantee that the anode is secured!
Crystal Prop is a self-cleaning, biocide-free, non-flaking, long-lasting paint. It has been specially developed for use on propellers, shafts, struts, sail drives, outdrives and other metal underwater equipment. Once applied, it creates a durable, hard and smooth surface to which no fouling can adhere. Crystal Prop does not require a primer as it adheres extremely well to metal. This makes it extremely durable and able to withstand the cavitation of propellers.
The Crystal Prop Kit consists of two bottles of paint and hardener, which are mixed in a 1:1 ratio. It is a one-coat application that can be applied with a brush or as a spray.Each SET consists of:Paint, 50ml Hardener, 50ml mixing containerCrystal Prop creates an extremely smooth propeller surface, resulting in less water resistance. This improves the overall performance of the boat and leads to a higher hull speed, lower fuel consumption and better protection against cavitation. Sea growth cannot adhere to the paint. A treated propeller cleans itself as soon as it starts to turn. In contrast to conventional antifouling coatings, Crystal Prop does not lose its efficiency even after extended use.PERMANENT BARRIERSRC on the propeller shaft
It forms an excellent barrier against corrosion by forming a strong protective film over the metal, shielding it from galvanic currents. This extends the service life of victim anodes. Crystal Prop is an eco-friendly product that is free from harmful toxins, biocides and metals.SIMPLE APPLICATIONThe SRC is non-corrosive because it is made of nylon.Are you looking for an uncomplicated solution to protect your boat from fouling? Unlike other antifouling paints, Crystal Prop is incredibly easy to apply. You can use a brush or spray gun to apply a single coat and that's it! The result is a durable protective coating that keeps your boat looking and performing at its best. And with a drying time of just 2 hours and a launching time of 48 hours, you'll be back on the water in no time. One 100ml kit of Crystal Prop is enough for about 1.5 square meters of metal surface.One 100 ml Crystal Prop kit is sufficient for: 3-blade, 16” propeller 5 times4-blade, 20” propeller 3 times3-blade, 16” propeller 1 timeWhen fully cured, Crystal Prop is an environmentally friendly product that is free of harmful toxins, biocides and metals.It dries to a hard and smooth surface that acts as an anti-fouling coating. Marine growth cannot adhere to the surface. As soon as water flows over the surface, any fouling slides off.What is the shelf life of Crystal Prop?Crystal Prop has a shelf life of 2 years if stored unopened in a cool, dry place. Once opened, however, it can only be kept for up to 6 months if it is properly resealed. To keep the product fresh, it is important to close the bottle tightly and store it upside down after opening.
Can Crystal Prop be repaired?Yes, to reapply it is sufficient to sand the surfaces with 240 grit sandpaper and reapply.
Does Crystal Prop adhere to plastic?Crystal Prop is designed to adhere to underwater metals. However, with a plastic primer, it will also adhere to underwater plastics.See simple instructions in the download area.
New, effective propeller antifouling spray: JOTUN Aqualine Spray & Vinyl PrimerJOTUN Aqualine Spray is a special aerosol antifouling spray paint for the protection of bronze propellers and other underwater parts, such as the shaft, shaft bracket or the end piece of the stern tube, as well as Z-drives or rudder systems. In addition to the excellent effectiveness of the antifouling against growth, it also provides good protection against electrolysis. For this purpose, it is necessary to apply a barrier coat with the corresponding vinyl primer before applying the antifouling. The propeller is then protected against fouling and electrolysis.The JOTUN-Aqualine antifouling paint is available from SPW as a spray in the color grey. You can choose both the paint and the primer in a 0.4 l spray tin or both in a SET.
We at SPW are delighted with the JOTUN antifouling, which has proven itself excellently on our own yachts in the North Sea. We continue to collect experiences from Mediterranean and Baltic sailors. Hazard warnings: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes severe eye irritation. May cause allergic skin reactions. May cause sleepiness and light headedness. Very toxic to aquatic life with long lasting effects. Note: Please note that this product can´t be shipped outside Germany due to DHL shipping restrictions for spray cans. In the case of an order to an EU country, we can offer you a different shipping method. In this regard, please contact us at +49471-77047 or by email at info@spw-gmbh.de.
Please note our safety data sheets in the download area below.
Hexagon screw as blanking plug for both the VARIPROP and the VARIPROFILE feathering propeller: VARIPROP Up to and including year of manufacture 1997 = M6x6mm From year of manufacture 1998 = M5x6mm VARIPROFILE All years of manufacture = M5x6mm Please select your size.
LOCTITE low (low strength) threadlocker. Prevents the screws from loosening due to vibration, yet easy to remove. Fl. 3ml LOCTITE medium (medium strength) threadlocker. Prevents the screws from loosening due to vibration and seals them at the same time. Fl. 3ml LOCTITE low+medium (low+medium strength) threadlocker. Set: 1x Loctite low + 1x Loctite medium; 3ml each
Corrosion-Stopper, 10 g tube (in ziplock bag)Tef-Gel® is a waterproof, PTFE-based paste that can be used universally. It prevents the blossoming of metal and reliably protects against corrosion between aluminum and stainless steel as well as bronze metals. It can also be used as a seawater-resistant lubricant and as a sealant to stop water ingress. Always install your screws and bolts with Tef-Gel® and everything will be easy to undo, even after intensive use in seawater. The same applies to shroud tensioners. Tef-Gel® is not dangerous to health and has no hazard labels. It is also eco-friendly. The product can be stored for a period of more than 10 years. Note: Please note that due to shipping restrictions for liquids, this product can´t be shipped outside Germany.
The service package includes everything you need for independent maintenance of the propeller. The package is available here in the store for the DF/GP-80, 107, 110, 112, 128 and 140 and consists of: 1x grease nipple M51x hand lever grease gun1x cartridge of special EP/SAL grease1x zinc anodeFor the Variprop DF/GP-80 & DF/GP-107 we also offer the service package optionally with magnesium (sweet water) and aluminum anode (brackish water).
For sizes without anode specification, the zinc anode (salt and brakish water) is automatically supplied.
To order, please select your propeller type.
The service pack includes everything you need in order to do the maintenance of your propeller yourself and consists of:
1x grease nipple M5, 1x manual lever grease gun, 1x cartridge of special grease EP/SAL, 1x zinc anode
To place an order, please select your propeller type.
Puller for Variprop DF/GP80 - DF140 for 2-, 3- and 4-blade feathering propellers.
The puller helps you to easily remove a stuck propeller from your shaft. To order, please select your propeller type and the number of blades. (2-blade puller not pictured)
Screw set for the VARIPROFILE VP64 and VP76 rotary blade propeller for connecting the saildrive or shaft hub to the propeller head. You will find the respective drawings for the item numbers under "Pictures" and "Downloads PDF" for the individual sets. Please select the desired set. SET for Saildrive - VP64 & VP76 Connection of the SD hub with the rotary blade head (See 1st drawing: items 6 and 7) Contents: 6x flat head screw 6x lock washerSET for shaft - VP64 Connection of the shaft hub with the rotary blade head (See 2nd drawing: items 6, 7 and 8) Contents: 3x cylinder head screw 3x lock washer 3x grub screw, pointed SET for shaft - VP76 Connection of the shaft hub with the rotary blade head (See 2nd drawing: items 6, 7 and 8) Contents: 3x cylinder head screw 3x lock washer 3x grub screw, pointed
Buffer for VARIFOLD 3- and 4-blade folding propellers minimize the shock when opening the blades. The hard-wearing rubber or plastic buffers fit securely in the special cut-outs in the saildrive hub.
This ensures that the propeller starts up smoothly without the buffers coming loose. Please select the correct buffer size according to your propeller type and the year of manufacture.
VF-108 <2011
Polyrethane (rubber) buffers for the Varifold 3-blade folding propeller by SPW for the hub-version up to the year of manufacture 2012.
Black, round 20mm x 5mm
VF-108 >2012
Buffers for the Varifold folding propeller 3- und 4-blade (VF-108 & VF-120) for the hub-version, year of manufacture 2013 and later; you need 3 or 4 buffers.
White, round 24/19mm x 10mm with pin
Puller for the Varifold folding propeller, available for 2- and 3-blade propellers. The puller helps you to easily remove a stuck propeller from the shaft. Please select a propeller type when ordering.
Replacement anode holder for VARIFOLD folding propeller VF-108. This is required to fix the zinc anode; included with the purchase of a new VARIFOLD propeller.
Bumpers for VARIFOLD 2-blade folding propellers minimize the shock when opening the blades.
The hard-wearing rubber or plastic buffers fit securely in the special cut-outs in the saildrive hub.
This ensures that the propeller opens smoothly without the buffers coming loose. Please select the correct buffer size according to your propeller type and the year of manufacture. 1 SET = 2 items VF-70 <2010 Polyrethane (rubber) buffers for the Varifold 2-blade folding propeller from SPW for hub version up to year of manufacture 2010. Black, round 16mm x 8mm VF-70 >2011 Buffer for the Varifold 2-blade folding propeller from SPW for hub version from model year 2011. White, round 16mm x 5mm with pin
